Silky UM Kogyo, Inc
POCKETBOY 130 (Fine) Spare Blade
Spare Blade only for the Pocketboy 130mm fine tooth saw.
More Details
130mm (5.12 inch) long blade with 20 teeth per 30mm. Impulse hardened teeth and hard chrome treated.
- Teeth per (inch): 16.9
- 130 mm (5.12 inch) length blade
- Chrome plated, taper ground blade
- Electrical induction hardened teeth
- Low effort triple edge, non-set tooth design
Non-Set Teeth
The teeth sit within the blade’s thickness instead of being bent outward like many Western saws. Combined with a taper ground blade, this gives very smooth, fast cuts with minimal waste and a very clean surface.
Impulse-Hardening
The teeth are hardened with a quick, high‑frequency heat treatment so they stay sharp up to three times longer than normal teeth. These blades cut very fast and clean but generally cannot be resharpened and are replaced when dull.
Hard Chrome Plating
A modern protective coating that makes the blade surface very hard and resistant to rust and resin buildup. It extends blade life and keeps cutting performance high for professional use.
Mirai-Me (4 Cutting Angles)
A special tooth design with four cutting angles that lets one saw handle rip cuts, crosscuts, and slant cuts. It leaves an exceptionally smooth surface that often needs little or no sanding.
Taper Ground Blade
The blade is slightly thinner at the back than at the teeth. This reduces friction and binding in the cut, so the saw feels smoother, needs less effort, and leaves a narrower kerf.